NKS Strip Steel applies edges to our narrow width strip steel, majorly focus on cold rolled carbon steel and stainless steel. Or you can provide us any steel strip for our edging process. The available edge shape listed as below table.
In the same process, we can rewind edged material into ribbon-wound (pancake) or oscillated-wound coils (oscillation coils, traverse wound coil).
Strip steel for edging sections up to 150mm wide (5") can be wound in ribbon coils and sections up to 50mm width (2") .
Strip Steel
can be wound in oscillated coils with width from 8mm to 30mm in a coil. Oscillated coil width is 289 to 300cm (118") and inner diameter 400mm (157") weighing up to 900 kgs (2000 lbs) for maximum productivity.
京琳有限公司提供的倒角修邊加工服務, 帶料加工主要以本公司所銷售的冷軋碳鋼帶及不銹鋼為主, 您也可以提供您的任何金屬材料, 本公司將為您做倒角修邊(修毛邊)加工服務. 倒角修邊角度如下表所示.
|
|
一般鋼帶可做倒角修邊加工限寬150mm, 倒角修邊加工後我們可以將材料捲成2種型式: 一般鋼帶捲(ribbon-wound coils) 及複捲式鋼帶捲(oscillated-wound coils).
一般鋼帶捲倒角修邊加工後要包裝成複捲式鋼帶捲的限制為鋼帶 8mm至30mm, 複捲鋼捲寬289至300mm 內徑400mm, 一大捲總重限重900kgs.
|
| |
| Application 鋼帶倒角修邊(去毛邊) 應用 |
| |
The material of edging steel is best choice for manufacturing taping knives, saw blades, putty scrapers, doctor blades, scoring knives, hacksaw blades, jigsaw blades and razor blades, strip ruler, clip, clamp, hose clamp, wiper steel, and etc. For more application, please refer to the webpage of material application.
倒角修邊鋼材是製造膠帶刀的最佳選擇，鋸子刀片、膩子鏟運機、醫生葉片、評分刀、鋸條、拼圖刀片和刀片、鋼帶尺、彈片/扣具、雨刷鋼片等。其他更多可參考鋼材應用介紹網頁. |
| |
Standard Edges* 標準倒角修邊*
| Edge Shape |
Edge no. |
Edge Definitions |
 |
#1 Round Edge |
Full radkus round edge produced by skiving (cutting into layers) . |
 |
#2 Rolled Edge |
Modified round edge produce by edge rolls. |
 |
#3 Slit Edge |
A rotary slit edge that is roughly squared with the burr intact. |
 |
#4 Deburred Edge |
Same as a slit edge except the burr has been removed by carbide filing. |
| |
#5 Customized Edge |
Any customized edge, please contact us for your special required edge. |
*strip thickness: 0.2mm and up 鋼帶厚度: 0.2mm 及以上.
|
|
|
Ribbon-Wound Coils 一般鋼帶捲 |
Oscillated-Wound Coils 複捲式鋼帶捲 |
Standard Export Packing 以上為外銷包裝. |
Standard Export Packing. 以上為外銷包裝. |
|
| |
 |
|
